MC314 SJ FWC Sys, 4.3, 5.0, 5.7 Chv, full sys w/ v-belt, 94 & up

1990-1996 - Front Mounted Fresh Water Full System by San Juan Engineering, fits 305/350 CID 5.0/5.7L V8 Chevy MerCruiser, Carbureted or Throttle Body Fuel Injected engines w/ center discharge exhaust, Alpha, Bravo, or straight inboard. Works on engines with v-belts. Kit accommodates all engine options available except is will not fit if fuel filter is up high on the head. It must be bracketed off from manifold down low.. Also fits 4.3 V6. In some cases, a seperate raw water pump may be required w/ Alpha Drive 5.7L. Call for details.SPECIAL ADVANTAGES OF THE SAN JUAN COOLING SYSTEMS
Longer Engine Life.
No corrosion or harmful salt deposits.
More uniform operating temperatures are assured for greater fuel economy and the elimination of harmful sludge.
Permanent-type Anti-freeze may be used to insure year around protection.
Equipped with standard zinc pencil to protect against electrolytic action.
Workmanship and material fully guaranteed.
COMPACT The San Juan fresh water cooling system does not increase the height, width or length of the engine.
EFFICIENT Improved internal design gives generous cooling capacity. Temperatures will not surge after a hard run. Additional efficiency and protection from coolant loss is obtained through the use of a pressure cap.
DURABLE To insure years of satisfactory service, entire unit is constructed of pure copper with silver alloys. Also equipped with standard zinc pencil to protect against local electrolytic action.
QUICKLY INSTALLED This kit can be installed by anyone with a few common hand tools.
COMPLETELY ON ENGINE This San Juan Cooler is completely on engine, including cooler, mounting brackets, etc. Nothing in the "Bilge."
NO EXTRAS TO BUY
Designed for close tolerance Engine Compartment Installations

Additional Information

Click here to download manufacturers Literature and Instructions