Genuine Danfoss 180B0033 PAHT 12.5 High Pressure Pump
The Danfoss 180B0033 PAHT 12.5 is a genuine OEM high-pressure axial piston pump designed for technical water applications including ultra-pure water, deionized water, demineralized water, humidification, adiabatic cooling, high-pressure cleaning, dust suppression, and industrial high-pressure water systems.
PAHT pumps are positive displacement axial piston pumps that move a fixed amount of water during each revolution. Flow is directly proportional to shaft speed and remains consistent regardless of discharge pressure. Unlike centrifugal pumps, PAHT pumps maintain reliable flow performance across a wide operating range, making them an excellent choice for demanding technical water applications.
All major components are engineered for long service life, high efficiency, and minimal maintenance requirements. Danfoss PAHT pumps are designed for demanding systems where clean water compatibility, dependable high-pressure performance, and low life-cycle cost are critical.
Common Applications
- Ultra-pure water systems
- Deionized and demineralized water systems
- High-pressure cleaning with ultra-pure water
- Humidification systems
- Adiabatic cooling systems
- Dust suppression and odor control systems
- NOx reduction systems
- Gas turbine inlet fogging and fuel wash systems
- Industrial high-pressure water systems
Features
- Genuine Danfoss OEM pump
- PAHT 12.5 axial piston pump design
- Positive displacement operation
- Consistent flow regardless of discharge pressure
- Designed for technical water applications
- AISI 304 Stainless Steel housing
- Low maintenance requirements
- Compact and lightweight design
- Designed for high-pressure clean water systems
The PAHT 12.5 combines compact dimensions, high mechanical efficiency, and stainless steel construction, making it an excellent choice for demanding high-pressure technical water applications where reliability, water cleanliness, and long service life are critical.
Product Specifications
- Manufacturer: Danfoss
- Part Number: 180B0033
- Series: PAHT 12.5
- Product Type: High Pressure Pump
- Pump Type: Positive Displacement Axial Piston Pump
- Housing Material: AISI 304 Stainless Steel
- Geometric Displacement: 12.5 cm3/rev
- Typical Flow at 1200 RPM: 3.3 GPM
- Typical Flow at 1800 RPM: 5.3 GPM
- Maximum Pressure: 2031 PSI (140 bar)
- Minimum Outlet Pressure: 145 PSI (10 bar)
- Maximum Speed: 2400 RPM
- Typical Motor Size at 1800 RPM: 10 HP
- Torque at Maximum Pressure: 23.4 lbf-ft (31.7 Nm)
- Media Temperature Range: 37 F to 122 F (2 C to 50 C)
- Ambient Temperature Range: 32 F to 122 F (0 C to 50 C)
- Approximate Weight: 17.0 lbs (7.7 kg)
- Recommended Applications: Ultra-Pure Water, Deionized Water, Humidification, Cooling, Cleaning, Technical Water Systems
- OEM Part: Yes
- Condition: New
Danfoss PAHT Pump Advantages
Danfoss PAHT pumps are engineered for technical water applications where clean operation, consistent flow, high efficiency, and long service life are required.
- Positive displacement axial piston design
- Consistent flow regardless of discharge pressure
- Zero risk of lubricant contamination
- All-stainless-steel construction for long service life
- Service intervals up to 8,000 hours when operated within Danfoss specifications
- Extremely high mechanical efficiency
- Compact and lightweight design
- Vertical or horizontal installation capability
- Very low pressure pulsation
- Suitable for electric motors or combustion engines
- No cooling circuit required due to high mechanical efficiency
Why Buy from Boatman's iNet Marine?
Boatman's iNet Marine supplies genuine Danfoss pumps, seal kits, filters, and replacement parts for industrial and marine applications. We stock many hard-to-find Danfoss components and ship quickly to help minimize downtime and keep your systems operating reliably.
Frequently Asked Questions
Is this a genuine Danfoss pump?
Yes. The 180B0033 PAHT 12.5 is a genuine Danfoss OEM high-pressure pump.
What type of pump is the PAHT series?
PAHT pumps are positive displacement axial piston pumps that deliver consistent flow regardless of discharge pressure.
What applications are PAHT pumps used for?
PAHT pumps are commonly used in ultra-pure water systems, deionized water systems, demineralized water systems, humidification, adiabatic cooling, high-pressure cleaning, dust suppression, NOx reduction, and gas turbine inlet fogging systems.
What filtration is recommended?
Danfoss recommends 10 micron absolute filtration with 99.98% efficiency for maximum pump life and performance.
How often should a PAHT pump be serviced?
When operated within Danfoss specifications, PAHT pumps typically provide service intervals of up to 8,000 hours. Actual service intervals may vary based on operating conditions and filtration quality.
Can PAHT pumps be installed vertically or horizontally?
Yes. Danfoss PAHT pumps may be installed either vertically or horizontally, providing flexibility for a wide range of system designs.
Download
Related Categories