Danfoss 180Z0285 Filter Element 20 Inch 10 Micron High Flow

Genuine Danfoss 180Z0285 Filter Element 20 Inch 10 Micron High Flow

The Danfoss 180Z0285 Filter Element 20 Inch 10 Micron High Flow is a genuine Danfoss replacement filter element designed for Danfoss high-pressure pump filtration systems. Proper filtration is critical for protecting APP, PAH, and PAHT pumps from particulate contamination and supporting long pump service life.

Danfoss high-pressure pumps require clean inlet water to protect the precision internal components used in positive displacement pump designs. Danfoss specifies 10 micron absolute filtration with Beta value greater than 5000 for PAH, PAHT, and APP pumps, meaning the filter captures 99.98 percent of particles 10 microns and larger.

Common Applications

• Danfoss APP pump filtration systems
• Danfoss PAH pump filtration systems
• Danfoss PAHT pump filtration systems
• High-pressure water pump inlet filtration
• Reverse osmosis and water treatment systems
• RO/DI water filtration systems
• General water filtration applications
• Replacement filter element service

Features

• Genuine Danfoss filtration component
• Designed for Danfoss high-pressure pump systems
• Helps protect precision pump components from particulate contamination
• Supports long pump service life and reliable system operation
• Suitable for demanding water filtration applications
• Compatible with Danfoss high-pressure pump filtration requirements

The 180Z0285 helps maintain the clean water conditions required for Danfoss high-pressure pump systems, reducing the risk of wear caused by suspended solids and supporting reliable operation in water treatment, RO/DI, and high-pressure pump applications.

Product Specifications

• Manufacturer: Danfoss
• Part Number: 180Z0285
• Product Type: Filter Element
• Series / Type: Type 5
• Filtration Rating: 10 micron absolute, Beta > 5000
• Element / Housing Length: 508 mm (20 in)
• Maximum Flow: 44.9 GPM (170 l/min)
• Inner Diameter: 46 mm (1.8 in)
• Outer Diameter / Housing Diameter: 115 mm (4.5 in)
• Effective Surface: 2.45 m2 (26 sq. ft.)
• Maximum Differential Pressure / Pressure Rating: 43.5 PSIG (3 barg) at 75 F (24 C)
• Recommended Replacement Differential Pressure: 29 PSIG (2 barg)
• Maximum Operating Temperature: 122 F (50 C)
• Materials: Polypropylene element and end caps; Buna-N seals
• Approximate Weight: 3.0 lb (1.35 kg)
• Compatible Housing / Elements: 180Z0082 20 in big blue housing
• Condition: New

Danfoss Filter Element Advantages

Danfoss filtration components are designed to protect high-pressure pump systems by removing suspended solids before they can damage precision internal pump components.

• Absolute filtration support for Danfoss APP, PAH, and PAHT pump systems
• Helps protect high-pressure pump components from premature wear
• Supports Danfoss service interval and warranty requirements when properly selected and maintained
• High dirt-holding capacity for reduced downtime
• Designed for reliable performance in demanding water filtration applications
• Easy replacement during scheduled maintenance

Why Buy from Boatman's iNet Marine?

Boatman's iNet Marine supplies genuine Danfoss pumps, filters, seal kits, and replacement parts for industrial and marine applications. We stock many hard-to-find Danfoss components and ship quickly to help minimize downtime and keep your systems operating reliably.

Frequently Asked Questions

Is this a genuine Danfoss part?
Yes. The 180Z0285 is a genuine Danfoss filtration component.

Why is filtration important for Danfoss high-pressure pumps?
Proper filtration protects precision pump components from suspended solids, helps reduce wear, and supports reliable operation in Danfoss APP, PAH, and PAHT pump systems.

What filtration level does Danfoss recommend?
Danfoss specifies 10 micron absolute filtration with Beta value greater than 5000 for APP, PAH, and PAHT pumps. This corresponds to 99.98 percent filtration efficiency for particles 10 microns and larger.

When should the filter element be replaced?
Danfoss states that the filter element has reached its dirt capacity at the maximum replacement differential pressure. For most listed filter elements, this is 29 PSIG (2 barg); for the 180Z0396 pre-filter, it is 22 PSIG (1.5 barg).

Download

• Danfoss Filter Solutions for High Pressure Pumps Data Sheet

Related Categories

• Danfoss Filters
• Danfoss Seal Kits
• Danfoss Repair Parts
• Danfoss Pumps & Parts